Flood Light Fitting (IP-65) suitable for use with HPSV / MH (Tubular / Elliptical) Lamps suitable for 230/240 Volts, 50 Hz AC supply confirming to IS: 10322/Pt-5/Sec-5/1987 and IS: 13383/Pt-3/1992 with latest amendments
Construction -

1. Die-cast Aluminium Housing. Aluminium body leads to good corrosion resistant housing
2. Control gear compartment is fitted with copper wound ballast, PF correction capacitor and electronic ignitor
3. Heat resistant Toughened glass cover of minimum 4mm thickness. This glass cover helps to ensure performance without the ingress of water (IP-65)
4. Rubber gasket provided.
5. Lamp holder base GES (E-40 / E-27), skirted porcelain
6. Lamp holder is prewired upto terminal block.

Application -

1. Construction sites
2. Coal yards
3. Railway marshalling yards
4. Airport
5. Sports stadiums
6. Façade lighting
7. Security lighting
8. High mast lighting

Flood Light Fitting (IP-65) suitable for use with HPSV / MH / HPMV (Tubular/Double Ended Lamps) suitable for 230/240/250 Volts, 50 Hz AC supply confirming to IS: 10322/Pt-5/Sec-5/1987 and IS: 13383/Pt-3/1992 with latest amendments
Construction -

1. Die-cast Aluminum Housing with separate lamp and control gear compartment in a single fitting. Aluminium body leads to good corrosion resistant housing
2. Pre- anodized Aluminum reflector
3. Control gear compartment is fitted with copper wound ballast, PF correction capacitor and electronic ignitor
4. Heat resistant Toughened glass cover of minimum 4mm thickness. This glass cover helps to ensure performance without the ingress of water (IP-65)
5. Rubber gasket provided
6. Lamp holder base GES (E-27/R7s), skirted porcelain
7. Lamp holder is prewired upto terminal block.

Application -

1. Construction sites
2. Coal yards
3. Railway marshalling yards
4. Airport aprons
5. ports stadiums
6. Façade lighting
7. Security lighting
8. High mast lighting

Flood Light Fitting (IP-65) suitable for use with HPSV / MH / HPMV Lamps suitable for 230/240 Volts, 50 Hz AC supply confirming to IS: 10322/Pt-5/Sec-5/1987 and IS: 13383/Pt-3/1992 with latest amendments
Construction -

1. High Pressure Die-cast Aluminum Housing with separate control gear. Aluminum body leads to good corrosion resistant housing
2. Separate Control Gear Box which can be located separately away from Luminaire for easy maintenance
3. Control gear compartment is fitted with copper wound ballast, PF correction capacitor and electronic ignitor
4. Heat resistant Toughened glass cover of minimum 4mm thickness. This glass cover helps to ensure performance without the ingress of water (IP-65)
5. Rubber gasket provided
6. Lamp holder base GES (E-40/27), skirted porcelain
7. Lamp holder is prewired upto terminal block.

Application -

1. Construction sites
2. Coal yards
3. Railway marshalling yards
4. Airport aprons
5. ports stadiums
6. Façade lighting
7. Security lighting
8. High mast lighting

Flood Lighting Luminaries (IP-65) suitable for use with HPSV / HPMV / MH Lamps suitable for 230/240/250 Volts, 50 Hz AC supply
Construction -

1. Cast Aluminium housing for good corrosion resistant
2. Heat resistant toughened glass cover with Silicon/EPDM/Neoprene rubber gasket to ensure performance without the ingress of dust and water (IP-65)
3. The optical system is provided with pre anodized aluminium reflector.
4. Epoxy powder coated painting
5. Lamp holder base GES (E-40), skirted porcelain
6. Cable Entry– 1 No.
7. Cable Gland – 1 No. (supplied alongwith fitting)
8. Earthing terminals
9. Lamp holder is prewired upto terminal block.
10. Hardware – Stainless Steel

Application -

1. Construction sites
2. Coal yards
3. Railway marshalling yards
4. Airport aprons
5. ports stadiums
6. Façade lighting
7. Security lighting
8. High mast lighting

General description -
Flood Lighting Luminaries (IP-65) suitable for use with HPSV/MH/HPMV (Tubular/Elliptical) Lamps suitable for 230/240/250 Volts, 50 Hz AC supply Confirming to IS: 10322/Pt-5/Sec-5/1987 and IS: 13383/Pt-3/1992 with latest amendments
Construction -

1. High purity anodized aluminium reflector
2. Die cast aluminium corrosion resistant housing
3. Heat resistant and toughened glass covers of minimum 4mm thickness. This glass cover helps to ensure performance without the ingress of water (IP-65)
4. Silicon/EPDM/Neoprene rubber gasket.
5. Galvanized/Powder coated M.S cradle clamp for mounting of fitting
6. Relamping from front/side
7. Lamp holder base GES (E-40), skirted porcelain
8. Lamp holder is prewired upto terminal block.
9. Stainless steel toggles

Application -

1. Construction sites
2. Coal yards
3. Railway marshalling yards
4. Airport aprons
5. ports stadiums
6. Façade lighting
7. Security lighting
8. High mast lighting

General description -

Flood Lighting Luminaries (IP-65) suitable for use with HPSV / MH / HPMV (Tubular / Elliptical) Lamps suitable for 230/240 Volts, 50 Hz AC supply
Type of Beam – The fitting is having rotationally symmetrical beam.

Confirming to IS: 10322/Pt-5/Sec-5/1987 and IS: 13383/Pt-3/1992 with latest amendments
Construction -

1. Highly polished stainless steel mirror reflector-cum-body
2. Stainless Steel body leads to good corrosion resistant housing
3. Pilfer proof and captive bolting system
4. Incorporated vibration isolators
5. Heat resistant and toughened glass covers of minimum 5mm thickness. This glass cover helps to ensure performance without the ingress of water (IP-65)
6. Silicon/EPDM/Neoprene rubber gasket.
7. Steel insert at threaded portions
8. Lamp holder base GES (E-40 / E-27), skirted porcelain
9. Lamp holder is prewired upto terminal block.
10. Hardware – Stainless Steel

Application -

1. Construction sites
2. Coal yards
3. Railway marshalling yards
4. Airport aprons
5. ports stadiums
6. Façade lighting
7. Security lighting
8. High mast lighting

General description -
Flood Light Fitting (IP-65) suitable for use with HPSV / MH / HPMV (Tubular / Elliptical) Lamps suitable for 230/240/250 Volts, 50 Hz AC supply confirming to IS: 10322/Pt-5/Sec-5/1987 and IS: 13383/Pt-3/1992 with latest amendments. If HPSV lamp is supplied alongwith the fitting, it shall confirm to IS: 9974. Type of Beam – The fitting is having rotationally symmetrical beam.
Governing Specification - Confirming to IS: 10322/Pt-5/Sec-5/1987 and IS: 13383/Pt-3/1992 with latest amendments
Construction -

1. Die-cast Aluminum corrosion resistant housing
2. Reflector is made of spun aluminum which is electrochemically brightened to ensure efficient light distribution.
3. Heat resistant and toughened glass cover of minimum 4mm thickness. This glass cover helps to ensure performance without the ingress of water (IP-65)
4. The toughened glass is fixed to the spun alumnum reflector with the help of rubber gasket to ensure IP 65 protection.
5. Relamping from front side
6. Earthing terminal provided
7. Lamp holder base GES (E-40 / E-27), skirted porcelain
8. Lamp holder is prewired upto terminal block.
9. The fitting is provided with external vibration isolators with base plate incorporated vibration damper

Application -

1. Construction sites
2. Coal yards
3. Railway marshalling yards
4. Airport aprons
5. ports stadiums
6. Façade lighting
7. Security lighting
8. High mast lighting

Remark – Being a Non-Integral Fitting, it is accompanied with a control gear box having the required accessories. For control gear description please refer to control gear page of the catalog.

Flood Light Luminaire suitable for use with GLS Lamp suitable for 230-250 Volts, 50 Hz AC supply confirming to IS: 10322/Pt-5/Sec-5/1987 and IS: 13383/Pt-3/1992 with latest amendments
Type of Beam – The fitting is having rotationally symmetrical beam.
Construction -

1. Spun Aluminum sheet reflector cum housing
2. Spun Aluminum sheet reflector inside highly polished  ,  provides efficient light distribution
3. Heat resistant Toughened glass cover ( optional )
4. M.S. clamp with M.S. cradle
5. Lamp holder base GES (E-40 / E-27), skirted porcelain
6. Relamping from front side.

Application -

1. Construction sites
2. Open Areas
3. Building & Monuments

Technical Specifications -

Outdoor halogen Flood Lights suitable for  linear tungsten Cap base Rx7S Halogen Lamp  to operate on 240/250  Volt 50 Hz AC supply

• Enclosure IP55
• Die Cast Aluminum Body
• Anodized Aluminum Reflector
• Heat resistant toughened glass cover
• Complete with bracket without lamp
• Lamp holder suitable for double ended halogen lamp with Teflon coated wire upto the terminal block
• Neoprene/Silicon rubber gasket

	Note: The actual product may differ from the picture given above